( 31214 Reads)|
After reading this section, students will be able to...
Living systems are made of organic molecules, and the cell has settled on just a few types of molecules to make up the majority of its structures: sugars, nucleic acids, amino acids and lipids. It is somewhat shocking that the list is so short, but it demonstrates the elegance of the whole system.
Monomers are all well and good, but cells are much larger than the molecular scale. How do they do it? These single molecular units are linked together by the cellular machinery into long chains of monomers, called polymers. Polymers make up the bulk of what a cell is, dictating its structure and function. Proteins are polymers of amino acids and they drive the chemical reactions of the cell or serve as parts of important structures. Starch is a polymer of glucose and polysaccharides are polymers of sugars that serve in the cell wall, the cell membrane and as storage products. DNA is a polymer of nucleic acids and is the library that stores the recipes for making an organism.
For polymers made up of more than one monomer, there are several important implications. How each polymer behaves is dictated by the order in which the monomers appear in the sequence of the polymer. Each specific combination of monomers will create a unique polymer that has a specific structure and function. Changing any one of the monomers in the polymer might change the properties of the polymer. These ideas are especially true for proteins.
A major point here is the economy that this affords to a cell. Instead of needing the ability to fashion a number of large custom designed molecules to carry out services within the cell, only a relatively small set of monomers needs to be made. These are then assembled to form polymers. This marked efficiency makes organisms very scalable, to borrow a computing term, allowing the construction of microbes only a millionth of a meter in size to blue whales measuring more than 24.5 meters. We will now look at the structure of important monomers in the cell, and they polymers that are made from them.
Sugars serve three basic purposes in the cell: as carbon and energy sources, as reservoirs of carbon and energy, and as parts of cellular structures. Large amounts of energy can be extracted from sugars by processes referred to as catabolism, as discussed in the metabolism chapter. This may explain why many microorganisms show a preference for sugars if given a choice of energy sources. The term carbohydrate is often used to refer to sugars because their chemical formula can be broken down into [C(H2 O)] x where x is any number greater than three.
Single sugar molecules are typically 3 to 7 carbons long and are termed monosaccharides . Figure 2.13 shows that each carbon on the sugar molecule is decorated with a hydroxyl group (OH) except for one carbon that forms a carbonyl group (C=O). If the carbonyl group is at the end of the molecule, it forms an aldehyde; if the carbonyl group is in the middle of the molecule, it forms a ketone. All sugars can exist as linear molecules in solution and those greater than 5 carbons long can also circularize with the carbonyl group attacking a hydroxyl on one of the other carbons. The circular sugar contains 5 to 7 members in the ring with one of the members being oxygen. Glucose, fructose and ribose are some of the more common sugars found in the cell.
Figure 2.13. Common monosaccharides. The structures of some important monosaccharides are shown. These often serve as building blocks for major structures in the cell, such as the cell wall and the genome. Both the linear and circular forms are shown.
Sugars readily polymerize: the combination of two sugars is called a disaccharide, while the combination of three is called a trisaccharide, and polymers of greater than three sugars are referred to as polysaccharides . Sugars are connected by α or β linkages. If the hydrogen is pointing up, it is an α linkage, if the hydrogen is pointing down, it is a β linkage as shown in Figure 2.14 . This distinction may seem trivial, but it greatly influences the properties of the molecule. For example, starch is made up of glucose linked by α-1,4 bonds. Starch is also water-soluble and can serve as a food source for many organisms. In contrast, cellulose, also containing glucose linked by β-1,4 bonds, is insoluble in water and is not as readily degraded by most microbes. Polysaccharides might contain only one type of sugar monomer or a variety of different ones, sometimes in repeating units.
Figure 2.14. Common disaccharides, trisaccharides and polysaccharides. Sugars can be linked together to form more complex polymers. Lactose is a common sugar in milk, while maltose is found in many grains. Starch found in potatoes and other vegetables is a long polymer of glucose units. A common form of starch contains 20% amylose and 80% amylopectin.
Polymers of sugars can serve as storage products for the cell. The breakdown of sugar can yield a huge amount of energy, which means that they are terrific molecules for effectively storing energy for later utilization. Starch and glycogen are two examples of sugar polymers that are used in this way. Polysaccharides also serve as structural components of many different molecules in the cell including nucleic acids and the cell wall.
Deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) are involved in information storage and processing. DNA serves as the cell's hereditary information, while RNA is involved in converting that information into functional products, such as proteins. Nucleic acids are long polymers of only 4 nucleotides : adenine, guanine, cytosine and thymine or uracil (thymine for DNA or uracil for RNA). Figure 2.15 lists the structure of the five nucleotides found in nucleic acids.
Figure 2.15. The structure of nucleotides. The nucleotides for adenosine (A), guanine (G), cytosine (C ) and thymine (T) as found in DNA are shown. The first three are also found in RNA, but when incorporated into that polymer, the associated sugar has two hydroxyls, as shown in the model of uracil (U). Uracil is the RNA equivalent of the DNA nucleotide thymine.
The nucleotide structure can be broken down into two parts: the sugar-phosphate backbone and the base. All nucleotides share the sugar-phosphate backbone, while the base distinguishes each type of nucleotide. Linking these monomer units together using a 5'-oxygen on the phosphate and the 3'-hydroxyl group on the sugar forms the nucleotide polymer as shown in Figure 2.16 . Many thousands of DNA nucleotides are strung together to form genes and chromosomes.
Figure 2.16. A schematic of the nucleic acid polymer. In this picture the bases of the two anti-parallel (having their 5' to 3' linkages running in opposite direction) strands of a DNA double helix are shown. Note the sugar-phosphate backbone from which the bases extend and pair with matching bases from the other strand. The dashed lines show hydrogen bonds between the base pairs.
The bases of the four nucleotides are different, but there is also a pattern. Adenine (A) and guanine (G) are purines, and therefore have a distinctive two-ring structure; they differ in the chemical groups attached to the rings. Likewise, cytosine (C), thymine (T) and uracil (U) are all pyrimidines and share a single-ringed structure, but also differ in their attached groups. Not surprisingly, as these extra chemical groups distinguish the different purines and pyrimidines structurally, they are also responsible for their important functional differences as well.
The bases in a nucleic acid polymer are capable of forming hydrogen bonds with neighboring bases on a second strand of nucleic acid, a process termed base pairing. However, there are rules to this association. Adenine is capable of forming two hydrogen bonds with thymine (or uracil) and cytosine can base pair with guanine, forming three hydrogen bonds. Some of these bonds require the extra chemical groups mentioned above. If two single strands of nucleic acid have sequences that can base pair along the polymer (such sequences are sometimes said to complement), they will generate a long double-stranded polymer that has a staircase topology as shown in Figure 2.17 . This structure is termed a double helix, since two strands form the molecule and it spirals around an axis in a regular pattern. Such a reaction between two complementary DNA strands is spontaneous: if you mix two complementary single strands of nucleic acid together in a test tube at a reasonable temperature, pH and salt concentration, they will find each other and anneal to form a double-stranded polymer.
Figure 2.17. The Double Helix. Note how the two nucleic acid strands spiral around each other in a regular repeating pattern. There are 10 bases per turn of the double helix. Bases pair with one another in the center of the helix cylinder and form what some have likened to a spiral staircase. The above figure can be rotated by clicking on the arrows.
DNA almost always exists in cells as a double-stranded structure of complementing strands. It happens that this double-stranded form is rather stable . It is often assumed that the stability is due to the hydrogen bonding between the bases, but this is not the case (the bases would hydrogen bond just as well to water). Instead, it is largely due to the interaction between adjacent base pairs along the helix, which is termed base stacking. Finally, the larger organization of the DNA strands with respect to each other, termed the tertiary structure, is also fairly similar in all DNA molecules. One implication is that proteins that want to distinguish between different DNA molecules must do so by reading different primary structure sequences by interacting with the outer surface of the base pairs as shown in Figure 2.18.
Figure 2.18. A molecular model of the lac repressor. The repressor binding to its recognition sequence. Any DNA-binding protein that recognize specific DNA sequences must make specific contacts with that recognition sequence by reading the pattern of bases in the DNA. These proteins do this by making very specific contacts between themselves and those atoms on DNA that are different in the different bases. In this figure, the DNA helix is shown by the ball-and-stick figure running along the bottom and the protein is depicted by cylinders (which refer to alpha helices) and other "squiggles" (which refer to any other structure in the protein). The point of the figure are that the DNA is not opened up and that the recognition regions of the proteins are very often α helices that lay parallel with or perpendicular to the DNA helix. Not shown are the side chains of the amino acids that actual make the specific contacts with the DNA. In this and subsequent molecular figures, of three different displays will be shown: ball and stick, which shows all atoms larger than hydrogen; ribbon models, in which a ribbon that runs along the carbon backbone of the protein is displayed; and space-filling models, where the actual atomic surface of the molecule is shown. Sometimes, as in this figure, the ribbon form is modified slightly by showing cylinders for alpha helices instead of an actual helix. Most of the structures shown in this text are the product of X-ray crystallography, which essentially displays the position of every atom (larger than hydrogen) in a molecule. Increasingly all biological questions are being thought about in terms of these structures at the atomic scale.
In composition and therefore primary structure, RNA is similar to DNA, except that uracil (U) takes the place of thymine in the molecule and the ribose unit on each sugar contains a additional hydroxyl group. However, most RNA in cells exists as single-stranded molecules and not a complex of two different strands as with DNA. Now if complementary base sequences are present in an RNA molecule, it can fold back upon itself and base pair, so that many RNA molecules have at least some double-stranded regions. However, this bending and folding means that RNA molecules typically have much more complicated tertiary structures than does DNA. Both the single-stranded loops and the double-stranded stems are critical for the function of most RNA molecules. Many are involved in creating physical structures, such as ribosomes, that are involved in processing information. The other general class of RNAs are messenger RNAs, which represent a version of the DNA primary structure that is suitable for translation into protein.
Answer the questions below and then hit the Grade Exam button